The one user of The one user of Thinkpad T40p found his laptop has USB not recognized.
Although the USB looks fine but it was intermittent and didn’t really
work at all. In often times, plug in or unplug any USB device caused
of the Thinkpad T40p going freeze. It’s seeing the ports but unable to
read anything useful from them. It means the laptop’s USB can’t use
for camera, drawing tablet, mp3 player, or any devices.
The Thinkpad T40p with the problem of USB not recognized like above is
likely to be BIOS/CMOS related. The following steps to fix it are
quite technically advanced. However, that’s worth to try.
Firstly, you need to backup all of your data including drivers and
files you may want to keep. And then remove the CMOS// BIOS battery
from your system to wipe your CMOS/ BIOS settings and return them to
original factory settings. To do this, you need to disassemble your
Thinkpad T40p laptop until you can access into the IBM LENOVO system,
and you can free removing the battery. Once these all was done, you
can follow the next steps below:
- Adjust the jumper settings on the motherboard to clear the CMOS/BIOS.
- Placed the jumper onto the clear CMOS/ BIOS setting
- Leave it there about 10-15 seconds to wipe the current settings
- Replace the CMOS/BIOS battery only with a new battery
- Reload the system, followed by device drivers, and then each
individually program after that.
After doing the followed steps above but the Thinkpad T40p USB still
no recognizing it is likely that you possibly have either hardware
fault with the USB ports. Another possibility is your BIOS/CMOS need
updating with the latest firmware/software. For these reason you can
get them from http://www.ibm.com or http://www.lenovo.com found his laptop has USB not recognized.
Although the USB looks fine but it was intermittent and didn’t really
work at all. In often times, plug in or unplug any USB device caused
of the Thinkpad T40p going freeze. It’s seeing the ports but unable to
read anything useful from them. It means the laptop’s USB can’t use
for camera, drawing tablet, mp3 player, or any devices.
The Thinkpad T40p with the problem of USB not recognized like above is
likely to be BIOS/CMOS related. The following steps to fix it are
quite technically advanced. However, that’s worth to try.
Firstly, you need to backup all of your data including drivers and
files you may want to keep. And then remove the CMOS// BIOS battery
from your system to wipe your CMOS/ BIOS settings and return them to
original factory settings. To do this, you need to disassemble your
Thinkpad T40p laptop until you can access into the IBM LENOVO system,
and you can free removing the battery. Once these all was done, you
can follow the next steps below:
- Adjust the jumper settings on the motherboard to clear the CMOS/BIOS.
- Placed the jumper onto the clear CMOS/ BIOS setting
- Leave it there about 10-15 seconds to wipe the current settings
- Replace the CMOS/BIOS battery only with a new battery
- Reload the system, followed by device drivers, and then each
individually program after that.
After doing the followed steps above but the Thinkpad T40p USB still
no recognizing it is likely that you possibly have either hardware
fault with the USB ports. Another possibility is your BIOS/CMOS need
updating with the latest firmware/software. For these reason you can
get them from ibm.com or lenovo.com